Tecbears PLA+2.0, Upgraded PLA+(PLA Plus), 3D Printer Filament 1KG

(0)

~~$17.99 USD~~ À partir de $13.99 USD

En rupture de stock

Estimated delivery between Juillet 17 and Juillet 19. Order within .

Diameter: 1.75 ± 0.02 mm

Printing Temperature:

195–205°C: 50–100 mm/s
205–220°C: 100–300 mm/s

Bed Temperature:

When unheated: glue is required
When heated to 50–60°C: no glue needed

Bubbles: 100% bubble-free
Net Weight: 1 kg/spool
Gross Weight: 1.3 kg/spool
Length: 1.75 mm (1 kg) = 330 m / 3.0 mm (1 kg) = 110 m

Free shipping to most of USA, EU, UK, CA and AU regions
Guaranteed Secure Checkout

Pay with

Tecbears PLA+2.0, Upgraded PLA+(PLA Plus), 3D Printer Filament 1KG

~~$17.99 USD~~ À partir de $13.99 USD

Key Features

Print Settings

Specifications

Download

Key Features

TECBEARS 100% Wound Neatly Filament
Good comprehensive mechanical properties
1.75mm Diameter
Excellent toughness with no brittle breaking
Supports high-speed printing up to 300 mm/s

Recommended Printing Settings

Drying Settings: 50°C
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 205–215°C / 50–100mm/s; 215–245°C / 100–200mm/s
Bed Temperature (with Glue): 50–60°C
Ambient Temperature: Room Temperature

Physical Properties

Density: 1.21 g/cm³
Vicat Softening Temperature: 54°C
Heat Deflection (HDT): 56±3°C
Melting Point: 164°C
Melt Flow Rate: 8.3±2 g/10 min

Mechanical Properties

Tensile Strength: 46±5 MPa
Elongation at Break: 10±2.5 %
Flexural Strength: 83±5 MPa
Flexural Modulus: 2750±200 MPa
IZOD Impact Notched (X-Y): 10±3 kJ/m²

Filament TDS

Filament SDS

TECBEARS PLA+

TECBEARS PLA+ FILAMENT has the advantages of good bed adhesion, low shrinkage and clean prints without warping. Works perfectly with most FDM 3D printers.