Filament PETG phosphorescent pour imprimante 3D TECBEARS, 1 kg

(0)

~~$23.99 USD~~ $13.99 USD

En stock - Prêt à être expédié

Estimated delivery between Juillet 17 and Juillet 19. Order within .

Diameter: 1.75 ± 0.02 mm

Printing Temperature:

200–210°C: 50–100 mm/s
210–240°C: 100–200 mm/s

Bed Temperature:

When unheated: glue is required
When heated to 50–60°C: no glue needed

Bubbles: 100% bubble-free
Net Weight: 1 kg/spool
Gross Weight: 1.3 kg/spool
Length: 1.75 mm (1 kg) = 330 m / 3.0mm(1 kg) = 110 m

Free shipping to most of USA, EU, UK, CA and AU regions
Guaranteed Secure Checkout

Pay with

Filament PETG phosphorescent pour imprimante 3D TECBEARS, 1 kg

~~$23.99 USD~~ $13.99 USD

Key Features

Print Settings

Specifications

Download

TECBEARS GLOW PLA - Infused with phosphorescent materials, this glow filament emits a bright glow in low-light environments, perfect for creative gifts, party decoration, or spooky Halloween crafts.
GLOW IN THE DARK PLA - For better glowing, the prints is exposed to uv light to absorb light energy. Whether you're a hobbyist or pro, pla glow transforms ordinary prints into luminous masterpieces.
GLOW PLA FILAMENT - Minimum dimensional tolerance 1.75±0.02mm. Neat wound filament provides smoother printing. Store in vacuum-sealed packs with desiccants to prevent moisture and clogging.
EASY TO PRINT - The size of the glow in the dark filament is suitable for hanging on a lot of FDM 3D printers. TECBEARS glow pla filament has good bed adhesion, low shrinkage, no warpage during printing.

Recommended Printing Settings

Drying Settings: 50 °C
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 200–240°C
Bed Temperature (with Glue): 50–60 °C
Ambient Temperature: 200–210°C: 50–100mm/s; 210–240°C: 100–200mm/s

Physical Properties

Density: 1.23 g/cm³
Vicat Softening Temperature: 54 °C
Heat Deflection (HDT): 55±5°C
Melting Point: 164°C
Melt Flow Rate: 6.9±3 g/10 min

Mechanical Properties

Tensile Strength: 40±6 MPa
Elongation at Break: 10±5 %
Flexural Strength: 65±6 MPa
Flexural Modulus: 2300±300 MPa
IZOD Impact Notched (X-Y): 5±3 kJ/m²

Filament TDS

Filament SDS

TECBEARS PLA GLOW

TECBEARS PLA GLOW FILAMENT has the advantages of good bed adhesion, low shrinkage and clean prints without warping. Works perfectly with most FDM 3D printers.