TECBEARS Optimized Wood PLA 3D Printer Filament 1KG
Out of stock
Diameter: 1.75 ± 0.03 mm
Printing Temperature:
- 195–205°C: 50–100 mm/s
- 205–215°C: 100–150 mm/s
- 215–260°C: 150–400 mm/s
Bed Temperature:
- When unheated: glue is required
- When heated to 60–65°C: no glue needed
Bubbles: 100% bubble-free
Net Weight: 1 kg/spool
Gross Weight: 1.3 kg/spool
Length: 1.75 mm (1kg) = 330 m / 3.0mm(1kg)=115m
- Free shipping to most of USA, EU, UK, CA and AU regions
- Guaranteed Secure Checkout
Pay with
Key Features
Easy to print, high compatibility
Eco-friendly & biodegradable
No cracking or warping. Low shrinkage (0.3-0.5%)
Beginner-friendly
Recommended Printing Settings
Drying Settings: 50 °C
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 200–210°C: 50–100 mm/s; 210–240°C: 100–200 mm/s
Bed Temperature (with Glue): 50–60 °C
Printing Speed: 50–200 mm/s
Physical Properties
Density: 1.23 g/cm³
Vicat Softening Temperature: 54 °C
Heat Deflection (HDT): 55±5 °C
Melting Point: 164 °C
Melt Flow Rate: 6.9±3 g/10 min
Mechanical Properties
Tensile Strength: 40±6 MPa
Elongation at Break: 10±5%
Flexural Strength: 65±6 MPa
Flexural Modulus: 2300±300 MPa
IZOD Impact Notched (X-Y): 4.5±1.5 kJ/m²
TECBEARS PLA Wood
TECBEARS PLA Wood FILAMENT has the advantages of good bed adhesion, low shrinkage and clean prints without warping. Works perfectly with most FDM 3D printers.
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.

