TECBEARS Matte PLA 3D Printer Filament 1KG

(0)

~~$17.19 USD~~ From $10.99 USD

Out of stock

Estimated delivery between July 31 and August 02. Order within .

Diameter: 1.75 ± 0.02 mm

Printing Temperature:

205–210°C: 50–100 mm/s
215–245°C: 100–230 mm/s

Bed Temperature:

When unheated: glue is required
When heated to 50–60°C: no glue needed

Net Weight: 1 kg/spool
Gross Weight: 1.3 kg/spool
Length: 1.75 mm (1 kg) = 330 m

Free shipping to most of USA, EU, UK, CA and AU regions
Guaranteed Secure Checkout

Pay with

TECBEARS Matte PLA 3D Printer Filament 1KG

~~$17.19 USD~~ From $10.99 USD

Key Features

Print Settings

Specifications

Download

Key Features

Fantastic & Smooth Matte Finish
Neatly Wound Filament & No Odour
High Precision +/- 0.02mm Tolerance PLA Matte filament
High Fluidity, Less Stringing, Strong Layer Adhesion
High Compatiblity & Vacuum Pack

Diameter: 1.75 ± 0.02 mm

Recommended Printing Settings

Drying Settings (Blast Drying Oven): 50 °C
Printing and Keeping Container’s Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 205-215°C/50-100mm/s; 215-245°C/100-230mm/s
Bed Temperature (with Glue): 50 - 60 °C
Printing Speed: 50 - 100 mm/s; 100 - 230 mm/s

Physical Properties

Density: 1.31 g/cm³
Vicat Softening Temperature: 54 °C
Heat Deflection Temperature: 55 ± 5 °C
Melting Temperature: 162.6 °C
Melt Index: 5.5 ± 1.5 g/10 min

Mechanical Properties

Tensile Strength: 39 ± 6 MPa
Breaking Elongation Rate: 15 ± 5 %
Flexural Strength: 72 ± 6 MPa
Flexural Modulus: 3700 ± 400 MPa
Impact Strength (X-Y): 5 ± 2 kJ/m²

Filament TDS

Filament SDS

TECBEARS Matte PLA

TECBEARS Matte PLA FILAMENT has the advantages of good bed adhesion, low shrinkage and clean prints without warping. Works perfectly with most FDM 3D printers.